Viking Forum banner
5801 - 5820 of 5831 Posts

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
Yes. Air and dust.
 

· Registered
Joined
·
224 Posts
Does that back window help any with keeping air out ?

How do you like the soft top and doors ?
I have had the top for about 4 yrs now, would be without it.
I madebthe executive decision last night to cut a hole in the back window, for the duct work....I cringed so hard while doing it, but the end result was excellent.
Pictures to follow later today. All the duct work us in place and tiestrapped into place.
 
  • Like
Reactions: bd_skrillz

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
  • Like
Reactions: lwhite571

· Registered
Joined
·
224 Posts
That's the same cab that I have had for 4 yrs, Once its all secured, don't be afraid to trailer it down the highway, I have done many times, but, now that its older, my Velcro stripes are coming off so its not as safe anymore. I actually need to remove the Velcro , get new roll and reinstall, then I should be good for another 4yrs.
With that cab. and my new diesel heater mounted in the back, I'm good for at least -30c.
 
  • Like
Reactions: lwhite571

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
Are those doors all velcro? Zipper free?
 

· Registered
Joined
·
224 Posts
  • Like
Reactions: Sport4x4

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
Added a 1-1/4” piece of PVC to the scraper on my plow to keep it from digging in because I’m getting tired of all the gravel that ends up in the yard that I have to rake up in the spring as well as the occasional chunks of sod. Got this idea from the Wolverine forum. Hope it works, haven’t had any snow since the week before Christmas and all of that has melted. Been unseasonably warm so far this winter. We have had only 2 snow storms so far and then a big warm up after so nothing even on the ground right now.
Saw Wood Automotive tire Gas Flooring
Road surface Asphalt Motor vehicle Wood Bumper
 
  • Like
Reactions: lwhite571

· Registered
2017 Viking EPS
Joined
·
304 Posts
@Sport4x4 - I'll be interested to hear how that works. I put a rubber edge on my plow but haven't gotten to use it yet. My brother-in-law bent the hell out of his mounting plate and then "borrowed" mine. I haven't gotten around to ordering one yet.
 
  • Like
Reactions: Sport4x4

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
i have the same issues with rocks getting picked up by the first fresh snow as they stick to the snow,i use my kubota with the bucket early in the year as as it is easier to control than a blade until it gets packed in.
Nice, can I talk you into coming to my house with your Kubota and doing that for me? 😂
 
  • Haha
Reactions: cactus

· Registered
Joined
·
224 Posts
Finally finished, and it's a game changer for sure.
Heater ducting installed and maintained 15C/60F..
 

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
Very nice 👍
 

· Registered
Joined
·
224 Posts
Tried to upload a couple pics of the duct work....
 

· Super Moderator
Joined
·
5,195 Posts
Oh yeah, hope you've got a good pressure washer 🤣That's a serious bog hole..
 

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
Been there done that and with a trailer full of firewood 🪵. Not fun
 

· Registered
2020 Yamaha Viking EPS
Joined
·
1,629 Posts
@Sport4x4 - I'll be interested to hear how that works. I put a rubber edge on my plow but haven't gotten to use it yet. My brother-in-law bent the hell out of his mounting plate and then "borrowed" mine. I haven't gotten around to ordering one yet.
Worked great but after 3 uses it is breaking up. So I will be switching to a rubber horse mat bolted to the scraper blade looped underneath so I will need to find longer bolts.
 
5801 - 5820 of 5831 Posts
Top