[W1ngnut12]

I'm looking to install a harness in the rear seat for my niece. Trying to figure out the best belts and where people who have them in the rear if any install the shoulder harnesses.

 

[BadM0nkey]

This is what I did in my 3 seat.

Harness

 

[Sport4x4]

^^^that link takes you to announcements...???

 

[W1ngnut12]

This is what I did in my 3 seat.

Harness

Sorry but the link doesn't go to an old thread or anything it goes to announcements

 

[Sport4x4]

Type “harness” in the search box there are a few threads that come up that might be helpful

 

[BadM0nkey]

That is insane. It takes me right here!

TRY THIS ONE:

Pro Armor Safety Harness Installation (Driver)

This is how I chose to install mine using existing anchor points. You will need a flat blade screw driver, hex key, rachet with short extension, 10mm and 17mm sockets and a 17 mm combo wrench. Remove the seat bottom and side panel and find the seatbelt bolts. Unplug the seat belt...

www.vikingforum.org

 

[Pagerboy]

That is insane. It takes me right here!

TRY THIS ONE:

Pro Armor Safety Harness Installation (Driver)

This is how I chose to install mine using existing anchor points. You will need a flat blade screw driver, hex key, rachet with short extension, 10mm and 17mm sockets and a 17 mm combo wrench. Remove the seat bottom and side panel and find the seatbelt bolts. Unplug the seat belt...

www.vikingforum.org

Thanks