Viking Forum banner
1 - 20 of 51 Posts

·
Registered
Joined
·
965 Posts
Discussion Starter · #1 ·
How would we go about getting yamaha viking forum flags made, I was doing a Google search and found where guys on the rzr forum had some really cool flags made for there led whips

Sent from my SAMSUNG-SM-N900A using Tapatalk
 

·
Registered
Joined
·
210 Posts
I guess that you'd just need someone who knows their way around a graphic design program. After that we could just order a number of them. Maybe we can ask the forum owners to take this up too.

If there is enough interest, I think that a flag would be a cool idea.
 

·
Premium Member
Joined
·
99 Posts
I like how this looks. I think it would be great on a flag!

Right now I have an embrodery shop looking into making some items for me with it on.

Hand Towels and Face cloths, for those dusty trails.

We carry a face cloth in a plastic zip bag with water in the bag. For those dusty days.
 

Attachments

  • Like
Reactions: kasja55 and Marcie

·
Registered
Joined
·
965 Posts
Discussion Starter · #7 ·
These are other ones I have seen, it will be awesome if we can get these made

Sent from my SAMSUNG-SM-N900A using Tapatalk
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #8 ·


Sent from my SAMSUNG-SM-N900A using Tapatalk
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #9 · (Edited)
I was just got off the phone with Eric from quality flag, (they are the ones who made the rzr forum flags) and if we order 50 they are only $9.90 a piece, $10.90 a piece if we do 1/2 red and 1/2 blue. If there is any way to get this organized that would be great. If the forum gets them and then sell them to us for $19.90, that would be a nice little fundraiser for the forum

Quality flag phone number is 888-953-5247

Sent from my SAMSUNG-SM-N900A using Tapatalk
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #13 ·
I think the guy at quality flag said they normally used 12 by 18

Sent from my SAMSUNG-SM-N900A using Tapatalk
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #14 ·
I did not message them, I don't know how I was just hoping they would see this thread
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #16 ·
I sent a message, I don't know if i sent it to the right place though. hopefully we can make this happen. worst case scenario I will order 12 of them and sell them myself
 

·
Premium Member
Joined
·
3,378 Posts
If you sent a PM to member VikingAdmin, that should be the right person.
 
  • Like
Reactions: VikingAdmin

·
Administrator
Joined
·
200 Posts
arsonsrb, I didn't get your message but I am here now ;)

Alright just to make things easier. I would like to see how many are interested and what size every body wants.

Sizes up for consideration

6' x 10'
8' x 12'
10' x 15'
12' x 18'

Username / Size / Quantity


i.e. John Smith / 8' x 12' / 1

1. Mark Schroeder / 8" x 12" / 2
2. Aaron Srbinovich / 8"x12" / 2
3. Richard Thorne / 8"x12" / 2
4. cuda567 / 8"x12" / 1
5. Krazy Dave / 8"x12" / 1-2
6. kasja55 / 8"x12" / 1
7. Bud Man / 8"x12" / 1
8.
9.
10.
~
 

·
Registered
Joined
·
167 Posts
Mark Schroeder / 8" x 12" / 2

(I think 8 x12 feet is too much;))

This seems to be the standard Requirement for safety flags.

SAFETY FLAGS ARE REQUIRED ON ALL VEHICLES IN THE IMPERIAL SAND DUNES RECREATION AREA (This includes two-wheeled motorcycles.) All vehicles shall be equipped with a whip mast and a 6x12 inch red/orange flag. Flags may be of pennant, triangle, square, or rectangular shape. Masts must be securely mounted on the vehicle and extend 8 feet from the ground to the mast tip . Safety flags must be attached within 10 inches of the tip of the whip mast with club or other flags mounted below safety flag or on another whip.
 
1 - 20 of 51 Posts
Top