Viking Forum banner

small viper winch issue

1715 Views 5 Replies 5 Participants Last post by  Dubweiser
got my winch hooked up....the remote works fine but the dash switch runs backwards for what it says

out is in....in is out

solution ?

mounted my contactor on the rad brace on my eps Viking...just in case anyone was curious :)
1 - 6 of 6 Posts
Can you swap the wires on the back of the switch?
I would say your yellow and blue wires are backwards


Sent from my iPhone using Tapatalk
Can you swap the wires on the back of the switch?
x2 ...just switch the wires.
You have the plugs on the wrong leads on the contactor. Check the wire color and make sure its matches the color on the sticker for each lead. Mine did the same thing.
I will investigate all possibilities and post back :)
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top