Viking Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
When I put the key in and turn it, nothing happens. No sound. No lights. Nothing. I bought two new batteries, and a starter relay. Changed out the 40 amp fuse as well as the 10amp fuses that go to the starter relay. NOTHING.

Does anybody have an idea as to what might be the culprit/problem to the Yamaha Viking not starting?

Thanks in advance.
 

·
Registered
2020 Yamaha Viking EPS
Joined
·
715 Posts
Welcome to the forum. Have you checked for power at the solenoid and the starter? Have you tried bypassing the starter switch to determine if it is good or bad? Or check it with a DVM? I would start with the switch and its circuit (keyed ignition) since you don’t hear the anything like the fuel pump.
 

·
Registered
Joined
·
6,685 Posts
What led up to this? Was it fine one minute and then not? Can you give more details? No lights or display, nothing? Likely switch or relay if that. Did you submurge it? Power wash under hood?

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
1 - 3 of 3 Posts
Top