Viking Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey guys, I'm new to this forum but I have been keeping an eye on you guys before I bought my red viking this past week.
I installed the HD3 wheels with the Maxxis Bighorns 2.0, 28 inch. I believe one of the members, viking2k14 has my same setup. When I got the wheel package they came with 9 psi and the tires only measure about 26 in height installed. The viking manual says 11 psi on front tires but I am assuming those are the stock tires. The recommended psi for my new bighorns on the Maxxis website says 20 psi. What psi are you guys using? If I go from the current 9 psi to the 20 or so psi will I gain extra height? Kind of disappointed that tires now are only about 26" high. Thanks.
 

·
Registered
Joined
·
163 Posts
You would gain height at 20psi but that's way too much pressure. About right at 9psi or maybe a little lower. Just have to play with different pressures from about 7-12 and see what ya like.
 

·
Premium Member
Joined
·
3,378 Posts
Hey there, welcome, i think mine measure about 27", i think i run about 15-16 in the rear, about 12-13 in the front.
 
1 - 3 of 3 Posts
Top