Viking Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
965 Posts
Discussion Starter · #1 · (Edited)
After buying a couple brackets made for led whips and not being happy with them I came up with this.
2.5" utility trailer shackles that I bought at tractor supply

Painted them black

Removed the allen bolt in the seatbelt guide, and bolts the shackle to the roll cage


Now I finally have a sturdy mount for my led whip

And it dosnt get in the way of dump
 
  • Like
Reactions: Outfitter

·
Registered
Joined
·
965 Posts
Discussion Starter · #2 ·
They came in a pack of 4 and I only needed 2 so if anyone wants the other 2 PM me and I will mail them to you
 
  • Like
Reactions: Albertaminidumper

·
Registered
Joined
·
965 Posts
Discussion Starter · #3 ·
Nothin?
 

·
Registered
Joined
·
73 Posts
thanks for the suggestion. I will have to photo my flag mount also. I used a Western snow plow marker. I bent one, so I had an extra. I had to mount it on the back side of the seat belt bracket/tab. I then cut the flag stick down to about 6-12" and zip tied it to the marker and no more broken flag sticks.

PS you can get a CB antenna spring to do the same on an LED whip. this is what we do on the ATV
 

·
Registered
Joined
·
965 Posts
Discussion Starter · #6 · (Edited)

 
  • Like
Reactions: Brando31

·
Registered
Joined
·
53 Posts
thanks for this idea. sure beats paying $50 for the other mount clamp I found
 

·
Registered
Joined
·
45 Posts
Could you share how you wired the whip?
 

·
Registered
Joined
·
121 Posts
what brand whips?
 

·
Registered
Joined
·
45 Posts
1 - 10 of 10 Posts
Top