Viking Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 2018 Viking showing two error codes, 12 and 16. Any assistance would be greatly appreciated. Turn the key on, the solenoid will click. I have had jumpers on the battery and put different battery in unit from another unit. Just seems to not want to engage starter.
 

·
Registered
Joined
·
43 Posts
Fault code 12 Crankshaft position sensor: no normal signals are received from the crankshaft position sensor.
Fault code 16 Throttle position sensor: stuck throttle position sensor is detected.

The no crank is a result of the 12 code. Bypass the starter relay and see if it cranks. Its a common error that bypassing can clear. The other error code deals with the throttle position sensor. Do you have access to a service manual? It has the test and proper adjustments for the TPS.
 
  • Like
Reactions: cactus
1 - 2 of 2 Posts
Top