Viking Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Where is everybody connecting power to their sound bars at on the Vikings? I have a 2022 Viking VI that I mounted my Memphis sound bar in yesterday. I have a Hot, Ground and Ignition wire. I have them connected to the battery now, but I want to connect so the power to sound bar is off when my key is off. Thanks in advance.
 

·
Registered
2017 Viking EPS
Joined
·
257 Posts
Here's what I used on my Grizzlies, my Wolverine, and my Viking. This is a very simple way to get "key-on" power. It just plugs into the wiring harness at the 12V accessory port and gives you two hot leads. I'm not sure how many amps your sound bar pulls. You can also use this to power a relay and add a fuse block so you can add more electrical accessories.

WIRE LEAD
5KM-86171-00-00
 
  • Like
Reactions: cactus

·
Registered
2017 Viking EPS
Joined
·
257 Posts
The old skool cigarette plug in the middle of the dash.

EDIT: it's got a rubber cover over it. You could plug in a GPS or an automotive style phone charger.
 

·
Super Moderator
Joined
·
5,053 Posts
As above or you can use the helmet light, but you relay need to use a relay so your soundbar and whatever else draw straight from the battery.
 
1 - 5 of 5 Posts
Top