Viking Forum banner

2019 viking will not move

378 Views 8 Replies 5 Participants Last post by  cactus
Hi all. I was driving my 2019 viking this morning at about 45kms an hour. All of a sudden there was a loud noise, both rear wheels locked up, and now it will not drive. Engine starts and runs fine. Machine just had a full Yamaha service done at the dealer 71 kms ago. Any ideas? Thank you in advance.
1 - 9 of 9 Posts
Probably a middle gear failure. How many total miles on your Viking? Will it go in reverse? Low gear or 4 wheel?
  • Like
Reactions: 1
And welcome to the forum
sounds like it could be middle gear,but could also be your rear dif has siezed to,i would lift the rear wheels off the ground to see if you can isolate your problem.when my middle gear went there was oil leaking out the crankcase as well.
I'd say belt broke
  • Like
Reactions: 2
Probably a middle gear failure. How many total miles on your Viking? Will it go in reverse? Low gear or 4 wheel?
Has 5600kms. Won't move in forward, reverse, or 4x4. When I lightly accelerate I can feel it loading pressure. In neutral it rolls fine. And there is no oil leaking anywhere.
Like buckg2 suggested, definitely check to see if belt broke.
Have the sheaves ever been serviced? You said it just had a full service at the dealer, did this include the cvt primary and secondary with a new belt?
Has 5600kms. Won't move in forward, reverse, or 4x4. When I lightly accelerate I can feel it loading pressure. In neutral it rolls fine. And there is no oil leaking anywhere.
that;s how mine acted ,it would move but would bind up and let go.i had a friend tow me home and was fine in neutral'
when it is pressed forward the high beam icon in the guage lights, but no high beams.. low beams stay on.
Huh?? Please explain???
1 - 9 of 9 Posts
Top