Seizmik Door Kit for Viking- help!! - Yamaha Viking Forum
 1Likes
  • 1 Post By VIKE123
 
LinkBack Thread Tools
post #1 of 4 (permalink) Old 09-18-2019, 10:29 PM Thread Starter
Junior Member
 
Join Date: Aug 2018
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
(Thread Starter)
Seizmik Door Kit for Viking- help!!

I just received the Seizmik door and rear window kit for my 2016 Viking. For the life of me, I cannot figure out how to properly hang the door on this thing. Could someone be so kind to post photos (drivers side preferably) of the hinge and Z bracket/bar mounting locations? Also, I cannot figure out how to properly position the clamp that mounts on the top roll bar that secures the top of the Z bracket/bar. Cannot wait to get this installed!!
dumars is offline  
post #2 of 4 (permalink) Old 09-18-2019, 10:54 PM
Junior Member
 
VIKE123's Avatar
 
Join Date: Jun 2016
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Here you go hope this helps. Also i put the back of cab in front of the sound panel. I think mine cab was made for earlier models that did not have this panel.
Attached Thumbnails
Click image for larger version

Name:	cab.jpeg
Views:	81
Size:	169.1 KB
ID:	48899   Click image for larger version

Name:	cab1.jpeg
Views:	72
Size:	71.0 KB
ID:	48901   Click image for larger version

Name:	cab2.jpeg
Views:	62
Size:	97.4 KB
ID:	48903  

27" Tusk Terrabites
Camoplast T4S Tracks
Fox Podium 2.0 Shocks
Seizmik Full Doors(soft cab)
Slugged wet clutch
JBS sheave
VIKE123 is offline  
post #3 of 4 (permalink) Old 09-19-2019, 12:24 PM Thread Starter
Junior Member
 
Join Date: Aug 2018
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
(Thread Starter)
Thank you! There is supposed to be an open air gap between the door and frame when closed right? Also, did you remove the sound dampener panel when installing the back?
dumars is offline  
 
post #4 of 4 (permalink) Old 09-20-2019, 12:02 AM
Junior Member
 
VIKE123's Avatar
 
Join Date: Jun 2016
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
There is a little gap but not much. Probably more on top. You can swing the hinge piece in a little to close gap more. It takes some time making little adjustments even bending door frame a little here and a little there to get things just right. As far as the sound damping panel goes ended up leaving mine in place but pulled seats out so i could install back in front of it. I know i had to cut some slits in it to get everything attached again. Its a little tight this way but it worked out. I think these were originally designed for machines with out the sound damping panel. All in all i really like mine!
cactus likes this.

27" Tusk Terrabites
Camoplast T4S Tracks
Fox Podium 2.0 Shocks
Seizmik Full Doors(soft cab)
Slugged wet clutch
JBS sheave
VIKE123 is offline  
Reply

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome